Nov

Waterproofing Bathroom – Australian Standards

Having a waterproof bathroom to Australian Standards is not only essential when it comes to a well constructed and comfortable home, it’s also the law in Australia.

Waterproofing a bathroom requires you to install a barrier around the walls and floor of your bathroom in order to protect your home from water damage that can occur over time. No one wants a leaky home! It takes particular tools, products, and knowledge to waterproof your bathroom correctly, and waterproofing your shower properly is best left to the experts to ensure the future integrity of your home.

Sep

9 Warning Signs of A Leaking Shower Seal

A leaking shower seal can cause great structural damage to your bathroom, which can be costly to repair. So, if you suspect any leaks from your shower seal, you should take swift action and address the issue through shower sealing to reduce the extent of the damage. But how exactly can you tell that your shower seal is leaking? What are the warning signs?
Let’s find out.

Aug

What You Need To Know About Sealing a Shower

Are you looking online for helpful information about sealing a shower? A leaky shower is a problem no-one wants. It can lead not only to property damage and decay but also to personal injuries. Plus, who wants water stains appearing on their dining room ceiling from an upstairs bathroom? Nor do you want your home to become victim to a slow leaking drip in your walls that goes undetected for years. The damage of rot and mould will surface someday, and by that point, it likely spells trouble.

Aug

Your Investment Property Shower Repairs: What You Need to Know

Shower Repairs for Investment Properties: why you should fix before it’s too late

Property prices are at an all-time high and look set to continue to rise. Across Australia, there is a lack of homes for sale which is pushing prices up and home sales are happening at lightning speed. As a property investor, we’re sure you are aware of the housing boom and we want to ensure you are in a position to maximise your profits today and in the future. Don’t delay your investment property shower repairs.

One thing that can quickly and suddenly ruin your investment property success is the humble bathroom shower. Yes, the place where people (should) wash every day, can also wash away any profits from your property.

Here’s a look at how a leaky shower can destroy your investment property and why you should invest in a leaking shower repair before it’s too late!

Jul

Shower resealing: what does resealing a shower really mean?

For most people, the idea of redoing their shower is something that only surfaces once there is visible damage. Mould accumulates, water seeps and a musty smell sinks in. There could even be shower leaks and dripping(yikes!). You can see that something probably, (read: “definitely”), needs fixing. So, what’s next? A bit of new grouting should do the trick, right?

Yes, for very minor repairs, this might solve the problem. But in most cases, just adding new grout doesn’t do it. Unfortunately, in the vast majority of situations, the problem with water leakage is much bigger than meets the eye. In fact, a lot of damage can be unseen. And it’s serious. Homes To Love.com.au lists bathroom leaks as one of the top 5 common types of water damage in Australian homes today.

So, what’s involved? Resealing your shower properly takes multiple steps. At Leaky Showers, we ensure your shower is fixed to code and beautifully done. We do this by adhering to strict standards and steps with fully trained professional staff.

1. Surface Prep

Our first goal in resealing your shower is to properly prepare the area for shower repairs. The surface of the shower walls, shower tiles and shower recess needs to be clean. This is important in order to create a good seal. We clean by removing any dust or particles. Sometimes a compatible solvent like methylated spirits will be used to clear away any oils or dirt present if needed. Clean, soft cloths are always used for optimal results.

2. Applying Primer

Next, we apply a primer. Some sealants don’t require a primer, but we do it anyway. Priming is a bit like adding an extra layer of insurance to your project. It improves adhesion and doesn’t cost you much but it could save you some trouble in the future. Depending on the surface, our primer is applied with a clean brush like you would apply paint. Sometimes we might use a lint-free cloth over the entire area or a roller.

3. Affixing Bond Breaker Tape

Next, bond breaker tape is applied to the corners. Tape up! This creates a full seal ensuring water won’t escape. Bond breaker tape has a sticky backing. We pre-measure and cut our tape and then apply it for the best fit. Next, the tape is sealed to the floor and walls of your shower using liquid sealant (see below).
4. Applying Liquid Sealant
This is where the liquid gold comes in! Liquid sealant is a product that creates a thin rubber-like membrane over the area being sealed. Typically black or blue (and sometimes green), sealant comes in a variety of materials. Applying liquid sealant is like giving your shower a permanent brolly. We apply a minimum of two coats (always), and spray the substance on or, again, apply it with a trowel or roller.

5. Adding Puddle Flanges

Finally, before any tiling is done a puddle flange is inserted into the drain. What does this do? This helps to guarantee you a watertight seal between the pipes and your shower. Without a puddle flange you could have problems. Not having a puddle flange can result in water seeping into your concrete walls or floors. This can cause serious structural damage.

6. The Legal Side of Resealing Your Shower

Yes, there is a legal side to a leaky shower, strange but true. Getting the details right not only saves you time and money but it’s required by law. In Australia, proper waterproofing has legal standards. This is because if water is leaking from your shower it can weaken the walls. It can also cause building movement and damage the floors and ceilings in your home.

Let us do the shower sealing work for you. We use the best products and materials available in Australia, for the best price and can usually carry out leaking shower repairs without tile removal. Contact Leaky Showers now to book a free pressure and moisture test. Get an obligation-free quote within 72 hours, and find out how we can help.

Jul

Leaking Shower Repairs – Where Is My Shower Is Leaking From?

Recent reports from Chubb show that between 2014 and 2018, a 72% increase in water damage claims among Australian households has been noted. The average amount per claim has also increased. In 2014, the average property claim related to water damage was noted as $17,627. Just four years later, this amount had increased to $30,361 on average. Another important finding is that 34% of Chubb’s property-related claims account for water damage.

Jun

Shower rebuilds are a breeze for Brisbane’s shower specialists!

At Leaky Showers Yatala, we are proud of our renowned shower repairs without removing tiles. Our skill and experience have seen us tackle many bathroom horror stories and saved many showers from those pesky leaks and damp problems. We love getting you back in your hot shower (once we’re gone, of course!) and enjoying the luxuries of a crack-free, perfectly sealed wet area. Your worries have evaporated, and your smile tells us so.

Jun

Don’t throw your money down the drain!

You don’t need to be Einstein to know your shower should be waterproof. But, you may not know that tiles and grout alone don’t withhold the water that hits your shower every day. Waterproofing has regulations that must comply with Australia’s building code and Australian standards, which state any wet area must be waterproofed.
We’ve spoken about the damage a leaky shower and poor waterproofing can do to the structure of your home in previous blogs. But what exactly is waterproofing, and why is it so important to have it completed by a licensed professional? Read on to discover more from the experts in shower waterproofing Coomera!